feat: gpgtools configure_ssh, store_publickey, --file source, initialize (v0.7.0-v0.9.0)
- configure_ssh (0.7.0): marker-managed per-host ssh client block in ~/.ssh/config, idempotent, unmanaged-alias guard (exit 11) - store_publickey (0.8.0): on-site bootstrap mirror of send_pubkey - run on the machine access is granted to, installs the key into the local authorized_keys (multi-key preserving, material dedup, 700/600, no possession check by design); shared --file PATH source (USB stick) for both store subcommands; identity block printed before acting (line, source, SHA-256 material digest) - initialize (0.9.0): gnupg readiness check + install, no card expectations; --dry-run; initialize_yubikey step 1 shares the flow - spec-first per SPEC 6.11/6.12: gpgtools spec.md items 2.6/2.7, 4.1.5, 4.8, sections 10-12; 91 tests in test_gpgtools.py; README/registry/CHANGELOG/version pins through 0.9.0 Generated by Mistral Vibe. Co-Authored-By: Mistral Vibe <vibe@mistral.ai>
This commit is contained in:
+57
-2
@@ -8,15 +8,70 @@ Format follows [Keep a Changelog](https://keepachangelog.com/en/1.1.0/) and
|
||||
|
||||
## [Unreleased]
|
||||
|
||||
### Added
|
||||
- Nothing yet.
|
||||
|
||||
## [0.9.0] - 2026-11-19
|
||||
|
||||
### Added in 0.9.0
|
||||
|
||||
- `gpgtools initialize`: checks that gnupg is ready on this machine
|
||||
(`gpg --version`) and installs what is missing — the gnupg-only
|
||||
half of `initialize_yubikey`, with no card expectations. Missing gpg
|
||||
triggers the same manager detection and sudo install; the check
|
||||
re-runs once after a successful install. `--dry-run` prints
|
||||
`already ready` or the install command and changes nothing. Intended
|
||||
as the on-site companion to `store_publickey --fingerprint` on a
|
||||
bare server. Spec section 12 written first, then tests, then code
|
||||
(SPEC 6.12); `initialize_yubikey` step 1 now runs the same shared
|
||||
flow instead of its own inline copy.
|
||||
|
||||
## [0.8.0] - 2026-11-19
|
||||
|
||||
### Added in 0.8.0
|
||||
|
||||
- `gpgtools store_publickey`: the on-site bootstrap mirror of
|
||||
`send_pubkey`. Run on the machine that access is being granted
|
||||
**to** (a server with ssh password authentication disabled, no key
|
||||
there yet, you at its console), it resolves one SSH public key and
|
||||
appends it to this machine's `authorized_keys` — so the machine
|
||||
holding the YubiKey can ssh in afterwards. Same five sources as
|
||||
`send_pubkey`; by design there is no proof-of-possession (the
|
||||
private half is elsewhere). Existing entries preserved verbatim,
|
||||
idempotent by key material, `~/.ssh`/file modes forced to 700/600,
|
||||
`--authorized-keys` override, `--dry-run`. Spec section 11 written
|
||||
first, then tests, then code (SPEC 6.12).
|
||||
- New shared source `--file PATH` for both `send_pubkey` and
|
||||
`store_publickey`: a file holding the SSH public key line,
|
||||
typically `yubikey_auth.pub` carried on a USB stick — no network,
|
||||
no gpg needed. Several keys in one file refuse rather than guess.
|
||||
- Both resolve-and-store subcommands now print an identity block (key
|
||||
line, source, and the key material's SHA-256 digest) before acting,
|
||||
so what was resolved can be compared across machines.
|
||||
|
||||
## [0.7.0] - 2026-11-19
|
||||
|
||||
### Added in 0.7.0
|
||||
|
||||
- `gpgtools configure_ssh` (guide step 7): writes a marker-managed
|
||||
`Host <alias>` block into the ssh client config — YubiKey identity
|
||||
first, fallback identity only when it exists, `IdentitiesOnly yes`.
|
||||
Idempotent (re-runs replace the block; everything outside the
|
||||
markers is preserved), `--dry-run`, and a guard that refuses when an
|
||||
unmanaged `Host` with the same alias would shadow the block. Spec
|
||||
items 2.5 and 10 written first, then tests, then code (SPEC 6.12).
|
||||
- Per-script local specs (SPEC items 6.11, 6.12): every script gets a
|
||||
spec that completely describes it — `spec.md` in a Python script's
|
||||
folder, `<name>.spec.md` beside bash/PowerShell/batch scripts — in
|
||||
the sectionized format of SPEC.md. Script work is spec first, then
|
||||
tests, then code (SPEC item 6.12). First specs added:
|
||||
tests, then code. First specs added:
|
||||
`gpgtools`, `hello`, `hello_bash`.
|
||||
|
||||
### Fixed in 0.7.0
|
||||
|
||||
- Test fixtures no longer carry private values: the real server IP,
|
||||
host alias, card serial, and public key fingerprint were replaced
|
||||
with documentation-range placeholders.
|
||||
|
||||
## [0.6.0] - 2026-11-18
|
||||
|
||||
### Added in 0.6.0
|
||||
|
||||
Reference in New Issue
Block a user